Wall Mounted AC Powered 4” LCD Controller. Controls Wireless or Wired Lighting Circuits. Touch Enabled and Touchless Operation.
The Universal Light Driver Controller (ULDC) is an easily installed and highly flexible dimmer for residential LED lighting applications. The ULDC-T gives you the freedom to wirelessly control your dimmable lights from anywhere, even allowing for multi-way control of a single lighting zone. Designed with the installer in mind, the ULDC-T simplifies wiring and installation for both retrofits and new construction.
Universal wall mounted lighting controller UWMC-Z04 is a highly integrated device with an 480 pixels by 480 pixels LCD display attached to a powerful computing platform. It also has power management functions and is powered from a 110V to 220V supply.
The wall mounted controller fits in the standard double gang switch opening; it can replicate the on/off function of double gang lighting switches for up to 200 W of power from each relay output.
As the controller is powered from an AC supply, a neutral connection is required. The L line input, L1 and L2 load outputs should share the same neutral N while installing the controller unit. When the power is applied for the first time to this controller, a proprietary application automatically launches and governs not only the configuration of the controller, but also navigates the user who is installing the lighting system through the setup of the zone and the load controllers for the lighting fixtures.
Item | Specification |
Supply | 100 ~ 240 VAC, 50/60Hz |
Screen | 4 inch, 480 X 480 pixels, multi-touch IPS (responsive screen with wide viewing angle) |
Ethernet | 10M / 100M Adaptive |
RS485 | Half-duplex over 3.81mm terminals |
Relay Load Capacity | L1, L2 <=200 W each |
Wireless Protocols | Proprietary 2.4GHz ISM Band |
Working Temperature | 32˚F ~ 104˚F |
Working Humidity | 5% ~ 90% RH |
| Wall Mounted Display Dimensions | ||
|---|---|---|
| Overall Mounting Cavity Size on Mud: | ||
| 3 3/16 “ | 3 3/16 “ | 1 ½” |
| 81mm | 81mm | 36mm |
| Mud Thickness: | ||
| 0.2” (5mm) | ||
| Mounting Cavity size below Mud: | ||
| 3″(77mm)) | ||
| LCD Face Size: | ||
| 3 3/8 “ | 3 3/8 “ | 7/16” |
| 86mm | 86mm | 11mm |
Connect your ULDC to one or more lighting fixtures. With CRIB’s Intercal8 application you can turn your light(s) on/off and control the dimming level.
CRIB’s ULDC-T can receive control signals wirelessly from the gateway/wall unit; as well as over-the-air updates for firmware.
The ULDC also accepts wired connections, using Modbus protocols over RS-485
Install multiple ULDCs within range of your gateway(s). Set up the ULDCs you want to control, which simultaneously link with your lighting fixture(s). Once setup is complete, you can control the lights in the zone individually per ULDC, or you can control multiple ULDCs at once.
Whether you are using single-way or multiple-way controls, the Intercal8 app allows you to set custom scenes for different times of the day, and different zones/groups of lights. Have your bedroom lights gradually increase when you wake up, manage dimming levels throughout the day, or set different configurations for different zones.
For ULDC models including a PIR sensor, the Intercal8 app allows you to enable/disable occupancy controls, regulate different dimming intensities for motion detected/undetected, or manage the time delay after motion is detected.
One or more wall mounted controllers can co-exist in a given zone for multi-way controls. Its user interface is user friendly with minimal cognitive load and at the same time, the UI adapts to the ambient conditions such as the lighting level in the zone. Although there is not much room for improvement, we are always open to customizing the UI for this controller to fit your exact needs.
4” LCD Display | ✔ | ✔ | ✔ |
WiFi Network, 2.4GHz Communications | ✔ | ✔ | ✔ |
Proximity Controls | ✔ | ✔ | |
MATTER Over WiFi Compatible* | ✔ | ||
Dual Relays for On/Off Control of Lighting Circuits | ✔ | ✔ | |
110V AC Power | ✔ | ✔ | |
48V Low Voltage DC Power | ✔ | ✔ | |
Proximity Sensor | ✔ | ✔ | |
Bluetooth Hub Integration* | ✔ | ✔ | ✔ |
Occupancy Sensor | ✔ | ✔ | ✔ |
Controls Phase-Cut Dimmers* | ✔ | ✔ | ✔ |
Controls 0-10V Output ULDCs* (ULDC-Z) | ✔ | ✔ | ✔ |
Controls ATX LED™ - Cleanlife LED™ DALI Hubs* | ✔ | ✔ | ✔ |
Controls DMX Master ULDCs* | ✔ | ✔ | ✔ |
Controls DMX Node ULDCs* | ✔ | ✔ | ✔ |
Controls PWM Compatible ULDCs* | ✔ | ✔ | ✔ |
Controls RGB, RGBW, Color Temperature | ✔ | ✔ | ✔ |
XT32-16 |
AT128 |
XT32M |
QT128 |
FT120 |
OT128 |
|
|---|---|---|---|---|---|---|
| Object Detection | ● | ● | ● | ● | ● | ● |
| Mapping | ● | ● | ● | |||
| Object Identification | ● | ● | ● | |||
| Channels | 16/32 | 128 | 32 | 128 | 120x160 | 128 |
| Field of View | 360° X 31° | 120° X 25.4° | 360° X 40.3° | 360° X 105.2° | 100° X 75° | 360° X 40° |
| Range | 80m @ 10% Reflectivity | 210m @ 10% Reflectivity | 80m @ 10% Reflectivity | 20m @ 10% Reflectivity | 22m @ 10% Reflectivity | 200m @ 10% Reflectivity |
| Min Range | 0.05m | 1m | 0.5m | 0.05m | 0.1m | 0.3m |
| Weight | 0.8 kg | 0.94 kg | 0.49 kg | 0.7 kg | 0.7 kg | 2.2 kg |
| Accuracy | 1 cm | 5 cm | 1 cm | 3 cm | 5 cm | 3 cm |
| Max Range | 120 m | 260 m | 300 m | 50 m | 50 m | 230 m |
| Resolution Horizontal | 0.09° - 0.36° | 0.1° - 0.2° | 0.09° - 0.36° | 0.4° - 1.6° | 0.625° | 0.1° - 0.4° |
| Resolution Vertical | 1°/ 2° | 0.2° - 0.8° | 1.3° | 0.4° - 1.6° | 0.625° | 0.125° - 1.72° |
The prices quoted are DAP and do include shipping, but do NOT include tariffs. If the sensor will be shipped to the US and you prefer DDP pricing (including tariffs), please contact our sales team at hesai@cratustech.com.
Hesai maintains a healthy stock of all their standard sensors (usually in the hundreds), so lead time is typically 2-3 weeks from receipt of order.
Yes! For larger orders, please contact our sales team at hesai@cratustech.com.
The lidar sensors come with a connection box, a cable that connections the lidar to the connection box, and a power supply. You only need to supply an RJ45 ethernet cable to connect to the connection box.
Yes, both CRATUS and Hesai have technical support staff in the US and abroad to support our customers.
No, the connection box translates automotive ethernet to standard ethernet and provides a convenient power connection. Customers who want to directly integrate the lidar may do so.
Sensors do NOT contain any form of wifi or wireless communication method and it does NOT include a hard disk drive to store data.
